Drawing<\/h2>\n

\n<\/div>\n

\n

PRECAUTIONS FOR USE<\/h2>\n

\n
• \u25cfEnsure that the Th side does not exceed 100\u2103. (Maximum temperature recommended for radiating side)<\/li>\n
• \u25cfIf it is dropped or mechanically impacted, it may be damaged. Please handle with care.<\/li>\n
• \u25cfThe performance cannot be achieved if the flatness of the heat exchanger in contact with the Peltier module is poor. As a rough guide, perform machining with a flatness of 0.02 mm or less.<\/li>\n
• \u25cfApply a thin layer of thermally conductive silicone grease to the Peltier module surface and the heat exchanger surface.<\/li>\n
• \u25cfUse at maximum voltage and maximum current is not efficient. It is recommended that the maximum voltage and maximum current be about 70% as a guide.<\/li>\n
• \u25cfAvoid control methods that rapidly reverse polarity in use because they shorten the life of the module.<\/li>\n
• \u25cfWith the exception of TEC2-B15828NC, silicone seals (equivalent to Shin-Etsu silicone and KE347) have been made on the side. Note, however, that water and moisture proofing measures are incomplete with side seals only.<\/li>\n
• \u25cfThe maximum compressive load of is 1 MPa.<\/li>\n
• * The above specifications are subject to change without notice to improve performance.<\/li>\n<\/ul>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

  Z-MAX’s Thermoelectric Cooler \u25a0Economical general use thermoelectric cooler (high performance and qualit […]<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":54,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-56","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"\n